Knkong Electric Co.,Ltd

Professional MV & LV switchgear panel manufacturer and supplier

Español
Chinese
English
Pусский
Home    Switchgear    GCK Type Low Voltage Switchgear 400V 690V LV panels LV switchgear

GCK Type Low Voltage Switchgear 400V 690V LV panels LV switchgear

400/690V, 50/60 HZ ,400~6300A
Modular design, easily assembly
enclosure: Max. IP40
CCC,ISO9001,GB7251,IEC439
Send us your SLD (Single Line Drawing) or requirements ,we design switchgear plan for you
Inquire

Product Introduction

General

GCK type low-voltage with drawable switchgear (hereinafter referred to as switchgear) is applicable to the power distribution system with AC 50(60)HZ, rated operating voltage of 660V and below. It consists of two parts, the Power Distribution Center (PC) cabinet and the Motor Control Center (MCC). As a power distribution motor control and lighting distribution equipment. The switchgear complies with IEC60439-1 (low-voltage switchgear and control equipment), GB7251.1-2013 (low-voltage switchgear and control equipment), and GB/T14048.1-2006 (low-voltage switchgear and control equipment general rules). And it has high breaking capacity, good dynamic thermal stability, advanced and reasonable structure, flexible electrical scheme, series, strong versatility, arbitrary combination of various program units, and a large number of loops accommodated by a single cabinet, saving floor space ,high degree of protection, safety and reliability, easy maintenance and so on. This product is widely used in power plants, substations,metallurgy, textile, petrochemical, factories and mines, high-rise buildings and other occasions.

 

Standard

GB7251     Low-voltage switchgear and control equipment
JB/T9661     Low Voltage Withdrawable Switchgear
Gb14048     Low Voltage Switchgear Control Equipment
GB4942     low voltage electrical enclosure protection class
GB3047     Basic dimensions of panels, frames and cabinets
GB9466     Low voltage switchgear basic test method
GB2681     Wire color in electrical installations
IEC439     Low-voltage switchgear and control equipment

 

 

Service environment

1.Air temperature: -35~+40

2.Humidity: Monthly average humidity 95%; Daily average humidity 90% .

3.Altitude :≤ 2500m

4.Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.

5.No frequent violent shake

 

Features

This device is a bayonet type switch device. It adopts a modular structure design. All the structural parts of the cabinet frame are galvanized, spray treated, and connected to each other as a basic cabinet frame with screws. Doors, baffles, partitions,drawers are added as required. , mounting brackets, busbars and electrical components are assembled into a complete control center cabinet. From the structure, it can be divided into three parts: cabinet, bus system and functional unit.

The device is designed for two types of three-phase four-wire and three-phase five-wire power distribution system, in which PE line of protection grounding bus is installed on the underside of the cabinet, and the outlet end is connected with bus bar,which makes it very convenient for users to connect cables; In order to ensure the reliable continuity of the grounding, all the guide rails and other general parts of the cabinet are galvanized; natural ventilation mesh covers are provided on the top of the switchgear without reducing the degree of protection of the enclosure. Compact structure, can accommodate more functional units in a smaller space, saving user investment.

1. Structural versatility. The cabinet body is assembled from modular structure of C section (E=25mm), and the assembly is flexible.

2. Various sizes of draw-out units can be combined in any combination to meet system design requirements.

3. vertical busbars and outlets have good insulation protection, thus ensuring safe and reliable after-cabinet maintenance.

4. The unique mechanical locking mechanism has obvious operation, test,and extraction position marks, and the operation is safe and reliable.

5. The drawer propulsion mechanism adopts bearing rolling, the drawer operation is flexible and convenient, and the same specification drawer
has strong interchangeability.

6. the design of the combination of a strong prog

 

Technical Date

No.

Item

Unit

Data

1

Rated voltage

V

400,690

2

Rated insulation voltage

V

660,1000

3

Rated current

A

400~6300

4

Rated current of drawer accessories

A

250,400,630

5

Rated short-circuit current

KA

20~120

6

Insulation: Power frequency withstand voltage

V

Main circuit:2500;

 Auxiliary circuit 2000

7

Protection class

 

IP4X

8

Operating mechanism

 

Manual mechanism;

Electric mechanism

9

Operational power supply

V

DC:110,220;

AC:110,220

10

Overall dimension(Width*Depth*Height)

mm

600(800,1000)x800(1000)x2200

11

Weight

KG

300~1000

Note: For short circuit breaking and peak current is based on Fuse plus combination

  

PDF下载按钮

Country *

Phone *

E-mail *

Message *

Verification code

If you are interested in our products or service, please leave message to us, we will reply you as soon as possible.

暂无表单数据